INPUT
The maximum input level for the Flamingo is + 18 dBm with the unit's gain set at 6 db. The
input is balanced with pin 2 being signal positive and pin 3 signal negative. To maintain
maximum performance Flamingo's inputs should be run unbalanced.
OUTPUT
The maximum output level for Flamingo is +25 dBm. The XLR connector is wired with pin 2
hot or signal "+", pin 3 signal negative and pin 1 signal ground. If it is
necessary to run the output unbalanced, tie pin 3 to pin 1 at the XLR connector.
POWER
Flamingo can run on 5 different line voltages. Please have voltage changed by a qualified
technician. The two voltage selection switches are located inside the unit near the power
connector. The unit MUST BE UNPLUGGED when changing voltage.
VOLTAGE AND FUSE TYPE
100, 120, 230, 240 volt; 50/60 Hz; 45 watts
MDL .5A Fuse for 100 V and 120V
MDL .25A Fuse for 230V and 240V
PILOT LAMP
#7335
SHIPPING WEIGHT
15 lbs. (8.6 kg)
DEPTH BEHIND PANEL
10 inches (31.75 cm) plus cabling
PANEL HEIGHT
1 rack space